Description
BAL-LAST No-Tip Bottle Holder (3D Printer File)
Stop accidental spills of LAST Record Preservative and LAST Tape Preservative. This handy bottle holder will keep your 2 oz. Preservative bottles safe from getting knocked over. Designed by The LAST Factory for your 3D printer, in a style reminiscent of a 45 single record. Specifically designed for holding the 2 oz. LAST Record Preservative and Tape Preservative.
This product contains the 3D Printer File so that you can print it yourself. You get the 3D .obj file, used here with the free Ultimaker Cura slicer and others likely work also. Dynamic Quality (.16mm) settings work well for Creality Ender-3 Pro. It is a simple print, but does take some time.
Do not enable ironing and keep the seam at the back. Set seam corner preference to ‘hide seam’. Infill specs are not critical, the default 20% works well. It takes almost 8 hours and 19m of filament. We print in PLA at standard travel speeds – you can likely increase them safely, but we didn’t try. Decrease top and bottom thickness to .6mm and reduce the initial slow layers from 2 to 1 for a bit of speed-up. The print should be quite clean, though you may get some stringing depending on your setup. If so, you can easily scrape it off with the edge of a sharp knife.
Being a digital download for a project that you will complete, we can’t guarantee results, but we believe you will have no trouble with it. Send us your comments and questions.
Upon purchase, a link to the BAL-LAST No-Tip Bottle Holder print file will appear on the order confirmation screen, as well as in your “Order Complete” email.
