Record Preservative (8 and 16 oz. Sizes)

Instructions:

Squeeze dropper to spread fluid over applicator1. Place freshly cleaned record on its sleeve on a clean firm surface.* Uncap the RECORD PRESERVATIVE bottle.  Fill dropper to the first line on the pipette.

2. Squeeze dropper and spread the fluid over the velvet applicator.

 

Sweep applicator over record
Sweep applicator over record

3. Place the applicator on the record, leaned to one edge.  With a gentle sweeping motion, follow the record grooves around the record two times while “rolling” the applicator to help distribute the preservative. Flip record over, re-wet the applicator, and repeat sweeping motion.

8. Affix LAST® sticker to record jacket to indicate that your record is now preserved for at least 200 plays.


Keep your stylus clean with LAST® STYLUS CLEANER and reduce stylus heat and wear on records with STYLAST™ STYLUS TREATMENT.


How to clean LAST Applicators

Last applicators can become dirty and contaminated in the process of cleaning records and applying LAST® RECORD PRESERVATIVE. They may be easily cleaned using the following operation: Place lukewarm water in a shallow pan or bowl. Stir in a few drops of dishwashing detergent. Place dirty applicators in the container and let soak for a few minutes.

Remove the applicators from the solution and gently rub the velvet faces together to dislodge soil. Rinse under cool running water blot with paper or cloth toweling. Allow to air dry and place back into use.

Note: Keep RECORD PRESERVATIVE out of the reach of children.

*Treating a dirty record with LAST RECORD PRESERVATIVE will NOT cause the dirt to stick to the record.  In fact, the treatment crawls under the contaminants and attaches to the vinyl.